Pressure Meter (4.4.1)

This article applies to versions 4.4.1 of P2 Explorer. For help on the latest version of the pressure meter, see Pressure Meter.

Related: Gauge, Level Meter, Temperature Meter

Overview

The pressure meter is used for measuring pressure against defined limits, called alarm thresholds.

The component changes in appearance when limits/alarm thresholds are exceeded.

The measured value and any of the limits can be fixed or variable, using tags, attribute values, dataset values or a fixed or variable value defined in Studio.

For example, you can configure a pressure meter to compare the actual value of the selected well's tubing head pressure against limits defined for that well.

Properties of the Pressure Meter

This section describes what needs to be configured in the Pressure Meter, in three main sections:

• Minimum, Maximum and Limit Thresholds
• Measured Data
• Appearance

1. Limits Set limits from Low through to High High, as well as a Minimum and a Maximum value. 2. Measured Data Configure the data to measure against the different thresholds. 3. Configuration This section has a number of options for configuring the meter's appearance in Run Mode. 4. Position in Precision Layout This section is available if the component is on a Precision Layout. 5. Position in Grid Layout This section is available if the component is on a Grid Layout.

As well as defining the measured values and limits, you can define a label and units, and you can configure whether to show the alarm indicator and the limits.

Minimum, Maximum and Limits

Choose values that range from low to high, using the Data Selector for each limit in the property panel.

There are five separate categories of data that you can select for the minimum, the maximum and for each limit: Dataset Column, Ad hoc Calulation, Attribute, Tag, and Value.

Measured Data

Use the Data Selector to configure the data to measure. There are five separate categories of data that you can choose from: Dataset Column, Ad hoc Calulation, Attribute, Tag, and Value.

Appearance

Each of the configuration options can be selected from the five different data categories: Dataset Column, Ad hoc Calulation, Attribute, Tag, and Value, using the Data Selector.

To simplify the explanation, we'll just look at using fixed values.

Label Text: Type a label for the component, which appears on the page in run mode. This should describe the pressure you are measuring.

Units Text: Type the unit of measure here. In run mode, the unit of measure (for example, psi) is displayed next to the value.

Decimals: Type in an integer for the number of decimal places for the measured value.

Confidence Threshold: The confidence value of the measured data is measured against this threshold. Both are percentage values. If the confidence value is below the threshold, the Low Confidence Data Indicator appears in run mode.

Show Alarm Indicator: Select this option (set to true) if you want alarm indicators on the control.

Show Limits on Hover: Select this option (set to true) if you want limits to appear when the user hovers the mouse over the pressure meter.

Style: The style you want to apply to the Pressure Meter component. If you are a Style Administrator, you can add a new Pressure Meter style.

The Pressure Meter in Run Mode

The pressure meter's appearance is partially based on the configured in the design mode, and partially based on the measured data and the alarm limits.

1. Low Confidence Data Indicator In this example, the measured data's confidence is lower then the configured confidence threshold for the pressure meter component - hence, the Low Confidence Data Indicator is displayed. 2. Alarm Indicator This particular alarm indicator shows that the measured data is in the Outside Target band. 3. Limit Values The values for Minimum, Maximum and the different limits can be seen when you hover over the pressure meter (if Show Limits on Hover is selected). 4. Bands These bands between the thresholds are graded from white to light grey to dark grey, the further they are from the target area. Target is in the centre, marked by a rim which is blue if the measured value is in the Outside Target segment (as in this example), otherwise grey. The bands ranging above the Target band are: Outside Target, High and High High. The bands ranging below the Target band are: Outside Target, Low and Low Low. 5. The measured value position The measured value is depicted by a small ball, positioned within its band, according to its value. The ball is coloured depending on which band it's in (blue for Outside Target, grey for inside Target, orange for inside Low or High and red for inside High High or Low Low). 6. Measured value The measured value. The decimal points are configured in the Decimals property. 7. Units This is the text in Units Text. 8. Label This is the text in Label Text.

Alarm Indicator

The Alarm Indicator only appears if Show Alarm Indicator is selected. This can be variable, depending on the data that determines this selection.

The Alarm Indicator is a coloured symbol representing the current state of the measurement, such as the red triangle on the screenshot below.

Hover over the alarm indicator to see the tooltip.

The symbol depends on what band the measured value falls into. From highest to lowest bands, here is the key:

	Band	Alarm Indicator	Symbol	Tooltip
	High High	Red Triangle		High High Alarm
	High	Orange Square		High Alarm
	Outside Target	Blue Triangle		Outside Target
	Target	No Indicator
	Low	Orange Square		Low Alarm
	Low Low	Red Triangle		Low Low Alarm

No Data Indicator

The No Data Indicator is a purple symbol that appears next to the High High band, with the tooltip 'No Data'.

The No Data indicator appears when there is no data to measure. For example, if the pressure meter is configured to measure the actual pressure of the selected entity, and the selected entity does not have this attribute value. Three Xs mark the place where the value would normally appear.

Low Confidence Data Indicator

The Low Confidence Data Indicator is a purple symbol with an exclamation mark that appears next to the High band, with the tooltip 'Low Confidence'.

The Low Confidence data indicator appears when the measured data's confidence is lower then the defined confidence threshold. Data confidence threshold is measured as a percentage.

Note: You need to select the Confidence Threshold in design, for this to work.

Tutorial

Watch the video below to see how the pressure meter's appearance changes as the value is updated.

Note how the value updates after the date/time toggle is selected. When the entities Hottes and Derby are selected, the No Data indicator appears. This is because neither of these entities have the attribute used in the measured data.

 

The tutorial describes how to configure the pressure meter shown in the video.

Refer to the Pressure Meter page in the Tutorials workspace, if you have access to this.

 

There are four steps in the tutorial:

• Step 1. Prepare the new tutorial page.
• Step 2. Update the selectedEntity default value.
• Step 3. Add hierarchy, labels and a current date/time toggle.
• Step 4. Add and configure a pressure meter.

Note: If you have already completed any of the tutorials listed below, you can skip the first three steps and go straight to Step 4.

• Temperature Meter tutorial
• Level Meter tutorial
• Gauge tutorial

Step 1. Prepare the Tutorial Page

Note: Before you start the tutorial, prepare a precision layout page in Studio and save it with a suitable name, such as Pressure Meter.

Step 2. Update the selectedEntity Default Value

In this step we're going to assign a value to the selectedEntity page default.

Related: See how to add and configure a Default Value.

1. Open the Default Values panel.

2. Type Beardy in the selectedEntity value text box.

Step 3. Add Hierarchy, Labels and a Current Date/Time Toggle

The hierarchy is for selecting a new entity, and the current date/time toggle is to refresh the data on the page. The labels are just for providing context to the page and can be left out, if you prefer.

Related: Hierarchy, Current Date/Time Toggle, Text Label.

1. Drag a Hierarchy onto the page. Resize it to fit the full height of the page. (If you are using the saved copy of the Temperature Meter/Level Meter/Gauge page, first remove the Temperature Meter/Level Meter/Gauge component.)

2. In the Hierarchy component's property panel, select P2 Corporate from the drop-down list of avaliable hierarchies for the Hierarchy Name.

3. Drag a Current Date/Time Toggle onto the page.

4. In the Current Date/Time Toggle component's property panel, type 3 in the Refresh Rate edit box, so that the page's endTime default is refreshed every three seconds.

5. Drag a Text Label onto the page, to the right of the hierarchy. Widen the label slightly.

6. In the Text Label component's property panel, add data to the label's Content: the selectedEntity variable.

7. Drag another Text Label onto the page, above the current date/time toggle. Widen the label slightly.

8. In the Text Label component's property panel, type Date/Time Toggle in the Content.

Step 4. Add and Configure a Pressure Meter

If you have already completed any of the tutorials listed below, open that tutorial page (for example, Temperature Meter) and save a copy to a new page called Pressure Meter.

• Temperature Meter tutorial
• Level Meter tutorial
• Gauge tutorial

Related: See how to select data for a component using the Data Selector.

1. Drag a Pressure Meter component to the right of the hierarchy.

2. Click and drag the edges to widen and lengthen the component.

3. Click on the Pressure Meter so that the properties appear in the component's panel on the right.

4. Assign tags to the maximum, limits and the minimum of the component. For each separate property, use the Data Selector to select Tag Data.

Maximum: Click the drop-down list, select tag MaxValue. Click the drop-down list again to close it. High High Limit: Click the drop-down list, select tag HighHighLimit. Click the drop-down list again to close it. High Limit: Click the drop-down list, select tag HighLimit. Click the drop-down list again to close it. Outside Target (upper): Click the drop-down list, select tag TargetRangeHigh. Click the drop-down list again to close it. Outside Target (lower): Click the drop-down list, select tag TargetRangeLow. Click the drop-down list again to close it. Low Limit: Click the drop-down list, select tag LowLimit. Click the drop-down list again to close it. Low Low Limit: Click the drop-down list, select tag LowLowLimit. Click the drop-down list again to close it. Minimum: Click the drop-down list, select tag MinValue. Click the drop-down list again to close it.

5. Now use the Data Selector to select the selectedEntity's THP!Actual attribute value, from the Oil Producing Well template, to the measured value's Attribute Data.

This assigns the selectedEntity's THP!Actual attribute value to the measured value: selectedEntity[Oil Producing Well]:THP!Actual. selectedEntity is a variable, which the end-user can change by selecting different entities from the hierarchy on the page.

6. Configure the appearance of the pressure meter. For each separate property, use the Data Selector to select Value Data.

• Label Text: Type in a Value of Tubing Head Pressure.
• Units Text: Type in a Value of psi.
• Decimals: Type in a Value of 2.
• Confidence Threshold: Select the variable Value of confidenceThreshold (this is a page default) .
• Show Alarm Indicator: Select the Value to set it to true.
• Show Limits on Hover: Select the Value to set it to true.

You now have a functioning pressure meter.

Try out the New Component

• Click the Preview button on the Studio toolbar to see what your page will look like in run-time.
• Select the current date/time toggle so that the data can refresh at the configured refresh rate.
• Select a different entity from the hierarchy, to see the tubing head pressure change.

Note how the data updates every three seconds, because of the current date/time toggle.